This thermowell designed according to DIN 43772 guarantees a high resistance to most industrial process environments. It is made from pipe or tube and is available in a wide range of diameters and materials. A specially designed thermowell tip ensures fast response times for a more efficient process control. Oversheaths in PTFE or tantalum can withstand extremely corrosive process conditions. It is offered with a variety of process connections: flanges, threads, weld-in or compression fittings.
-
Преимущества
-
Modular configuration according to DIN 43772
-
iTHERM QuickNeck: cost and time savings thanks to simple, tool-free recalibration of the insert
-
Extension, immersion length and total length can be chosen according to process requirements
-
Wide choice of dimensions, materials and process connections available
-
Specially designed tip for fast response times
-
-
Область применения
-
Protects the temperature sensor against physical and chemical stress
-
High robustness for challenging process conditions
-
Pressure range: up to 100 bar (1450 psi)
-
For use in pipes, containers or tanks
-
Improved ease of maintenance (sensor replacement without process shutdown) and recalibration of the measuring point
-
Характеристики и спецификации
-
Принцип измерения
Сварная термогильза
-
Характеристики / Применение
метрические размеры
согласно DIN 43772
присоединение к процессу: резьбовое, фланцевое, обжимной фитинг
с шейкой -
Соединительная головка
Внешняя резьба:
M24 x 1,5, 1/2" NPT, G1/2
Внутренняя резьба:
M20 x 1,5, 1/2" NPT, G1/2
QuickNeck -
Макс. стандартная погружная длина
4500 мм (177")
-
Максимальная длина по запросу
4500 мм (177")
-
Присоединение к процессу
Резьба:
G3/8", G1/2", G3/4", G1"
NPT1/2", NPT3/4", NPT 1"
M18x1,5, M20x1,5, M27x2, M33x2
R1/2", R3/4"
Накидная гайка:
M20x1,5, G1/2", G3/4"
Обжимной фитинг:
NPT1/2", G1/2", G1"
Фланец:
DN15 PN40 B1, C
DN25 PN20, PN40, PN100 B1, B2, C
DN40 PN40 B1
DN50 PN40 B1
ASME 1" 150 RF
ASME 1" 300 RF
ASME 1 1/2" 150 RF
ASME 2" 150 RF
ASME 2" 300 RF -
Внутренний диаметр защитной гильзы
9x1,25 мм
11x2 мм
12x2,5 мм
14x2 мм
16x3,5 мм
1/4" SCH80
1/2" SCH80
1/2" SCH40 -
Материал смачиваемых частей
316 (1.4401)
316L (1.4404)
316Ti (1.4571)
Сплав Alloy 600 (2.4816)
Сплав Alloy C276 (2.4819)
Сплав Alloy 446 (1.4749)
Сплав Alloy 321 (1.4541)
Оболочка: PTFE
Оболочка: тантал -
Шероховатость поверхности смачиваемых частей (Ra)
< 1,6 мкм (63,00 мкдюйма)
-
Форма наконечника датчика
прямой
усеченный
суженный
оптимизировано для обеспечения малого времени отклика -
Диапазон температуры
-200...1100 °C (-328...2012 °F)
-
Макс. рабочее давление (статическое)
В зависимости от конфигурации, до 100 бар
-
Макс. рабочее давление при температуре +400 °C
В зависимости от конфигурации